Spray
16 June 2017

Additives



Wladogas Energy Plus

Additive for fuel for competitions. Read more...

Wladogas Octane Booster

Additive for fuel for competitions. Read more...

Wladoil Diesel Plus

Multifunction diesel fuel additive. Read more...

Diesel Bio Active 250

Anti-algae additive for diesel. Read more...

Wladoil Additive CFPP

Antifreeze diesel additive. Read more...

Wladoil Bio Fuel ST

Anti-algae additive for diesel. Read more...

Wladoil Bio Fuel PR

Anti-algae additive for diesel. Read more...

WLADOGAS ENERGY PLUS

Fuel additive suitable for cars and motorcycles, with or without catalytic converters. It is a mixture of hydrocarbon components and oxygenated compounds with the addition of special additives that eliminate knocking.

WLADOGAS ENERGY PLUS when added to green gasoline improves the octane qualities and enhances their energetic power. For this reason, combined with a high lubricating power, it becomes a substitute for super-leaded petrol.

It is recommended in particular for:

  • vintage cars built before 1985
  • vintage motorcycles
  • sports competitions where the use of approved petrol is not required
  • engines prepared for high performance
  • two-stroke engines with a high compression ratio

Thanks to its cleaning action of the fuelling system and of the combustion chamber, it favors a more controlled combustion that is decidedly less polluting for the external environment.

It is recommended, for optimal mixing, to pour the additive into the tank first and then the petrol.

 

WLADOGAS OCTANE BOOSTER

Fuel additive suitable for cars and motorcycles, with or without catalytic converters, specially designed to allow combustion control in the combustion chamber. WLADOGAS OCTANE BOOSTER when added to the gasoline of the distribution network improves the octane qualities and enhances their energetic power. WLADOGAS OCTANE BOOSTER returns the original power to engines designed and built to run on leaded petrol, without suffering damage due to detonation or loss of performance due to the use of low octane green petrol.

The improvement of combustion favors less polluting emissions for the environment.

It is recommended in particular for:

  • vintage cars and motorcycles
  • vintage motorcycles
  • sports competitions
  • high performance engines
  • two-stroke engines

It is recommended, for optimal mixing, to pour the additive into the tank first and then the petrol.

 

WLADOIL DIESEL PLUS

Anti-freezing and cleaning additives for diesel. The DIESEL PLUS additives range includes products formulated with special additives that showcase the following characteristics:

  • "Flow improvement", ie the lowering the point of flow of diesel fuel. This allows a regular flow of fuel in the engine injectors and in the burner of the boilers, even at particularly low temperatures.
  • Dispersion: there is a lowering of the fog point, which makes the formation of large particles of insoluble products or impurities more difficult. The use of DIESEL PLUS allows to keep the most delicate parts of the power supply system free from clogging. This means that diesel filters above all remain clean, allowing cold starts without problems. In addition, the additives used are of the "ashless" type, that is, with very low ash, and completely free of sulfur.
  • Detergent: the fuelling system is kept clean by sludge and carbon deposits, with particular reference to the injectors. Also these additives are of the "ashless" type and absolutely free from sulfur.
  • Performance: a particular additive package increases the cetane number of diesel fuel, thus increasing the engine’s performance, optimizing combustion and reducing exhaust fumes.
 

DIESEL BIO ACTIVE 250

The DIESEL BIO ACTIVE diesel additive is an ANTI-ALGAE additive and is formulated with special additives that give it the following characteristics:

  • Dispersion: there is a lowering of the fog point, which makes the formation of large particles of insoluble products or impurities more difficult. The use of DIESEL BIO ACTIVE allows to keep the most delicate parts of the fuelling system free from clogging. This means that diesel filters above all remain clean, allowing cold starts without problems. In addition, the additives used are of the "ashless" type, that is, with very low ash, and completely free of sulfur.
  • Detergent: the fuelling system is kept clean by sludge and carbon deposits, with particular reference to the injectors. Also these additives are of the "ashless" type and absolutely free from sulfur.
  • Storage stability: significantly prevents bacterial overgrowth by allowing prolonged storage of fuels containing biodiesel (Bx)
 

WLADOIL ADDITIVE CFPP

The diesel fuel additive C.F.P.P. is a “flow improver” product, ie it is able to substantially lower the point of flow of diesel fuel. This allows a regular flow of fuel in the engine injectors and in the burners of the boilers, even at particularly low temperatures.

Its special additivation with dispersants also lowers the fog point, preventing the formation of large particles of insoluble products or impurities. This means that diesel filters above all remain clean, allowing cold starts without problems. In addition, the additives used are of the "ashless" type, that is, with very low ash, and completely free of sulfur.

  • as additive in large diesel tanks for heating systems installed in very cold areas (hotels, companies, etc.)
  • in the treatment of diesel oils for traction use in outdoor working machinery, even on occasional uses such as snow plows, construction machines, etc., which remain outdoors overnight

For optimal mixing, it is recommended to pour the additive into the tank first and then the diesel fuel.

 

WLADOIL BIO FUEL ST

The Wladoil FUEL BIO ST is a complete package of stabilizers and dispersants for biodiesel and fuels containing biodiesel.

The product increases the oxidation stability of fuels, both considering the Rancimat method and the ASTM D2274 one. The Wladoil FUEL BIO ST contains a dispersing agent that greatly reduces the tendency of the fuel to block the filters after a prolonged stay at low temperatures (Cold Soak Filter Blocking Tendency).

It is not a corrosive product and is compatible with metals and rubbers used in storage and distribution facilities. The dosage of Wladoil FUEL BIO ST depends on the characteristics of the diesel fuel and on the degree of stability desired, from 50 to 150 mg / l indicatively.

THE Treatment for blocked systems: It is necessary in cases of extremely high levels of contamination even when the dispensing pumps are blocked. The dosage is 1 liter on 6000 liters of product to be treated, equal to 160 ppm. After this treatment the treated fuel must be used for combustion.

Treatment for normal conditions: We recommend a normal use of 1 liter of product on 20,000 liters of fuel, equal to 50 ppm, for the normal maintenance of the storage and pumping system.

 

WLADOIL BIO FUEL PR

The Wladoil FUEL BIO PR is a microbiocide for the preventive and curative treatment of hydrocarbons contaminated by micro organisms and it is indicated in the treatment of all types of fuels, including biofuels.

It inhibits the growth of bacteria, fungi and molds. Its chemical-physical characteristics allow the treatment of both the hydrocarbon phase and the aqueous phase present in the bottom of the tanks, or the water / hydrocarbon interface.

It is not a corrosive product and is compatible with metals and rubbers used in storage and distribution facilities. The dosage of Wladoil FUEL BIO PR depends on the characteristics of the tanks and the degree of contamination of the product to be treated and varies from 50 to 250 mg / l.

In general, the following dosages are recommended.

"Shock" treatment::

It is necessary in cases of extremely high levels of contamination even when the dispensing pumps are blocked. The dosage is 1 liter per 1000 liters of product to be treated, equal to 1000 ppm. After 24 to 72 hours from this treatment it is necessary to filter the fuel considering the large mass of dead microorganisms that will settle on the bottom.

Curative treatment::

In case of non-excessive contamination, the recommended dosage is 1 liter for every 10,000 liters to be treated, equal to 100 ppm.

Maintenance treatment:

We recommend a normal use of 1 liter of product on 20,000 liters of fuel, equal to 50 ppm, for the normal maintenance of the storage and pumping system in order to avoid the beginning of formation of bacterial colonies.

Shares
Torna su