Spray
16 June 2017
Engine
Turbo Tested Shpdo Sae 15W-40
Oil for diesel engines S.H.P.D.O. Read more...
Turbo Tested Lt Le Diesel Oil Sae 15W-40; Sae 10W-40; Sae 10W-30
Oils for diesel engines X.H.P.D.O. Mid Saps. Read more...
Uhp Diesel Oil Sae 10W-40
Oils for diesel engines U.H.P.D.O. Read more...
Uhp-Ls A Diesel Oil Sae 10W-40
Oils for UHP Low Saps diesel engines and LEDL. Leggi altro...
Uhp-Ls Diesel Oil Sae 10W-40
Low Saps / LEDL diesel engine oils. Read more...
Diesel Mp Special Sae 15W-40
Oils for diesel engines. Read more...
Diesel D3 Sae (10W) 10W-20, 10W-30, 30, 40, 50
Oils for diesel engines, hydraulic systems and "powershift" transmissions. Read more...
Agri Uni Sae 10W-30, 15W-40
Multi-purpose tractor oils. Read more...
Multiservice Ac4 Sae 10W-30
Multifunctional oil. Read more...
TURBO TESTED SHPDO Sae 15W-40
Supermultigrade oil especially designed for aspirated or supercharged, pre-chamber or direct injection diesel engines.
It is formulated with special detergent, dispersing, antioxidant, anti-wear, anti-corrosion, anti-foam and anti-rust additives that make it particularly suitable in extremely severe conditions.
The Wladoil Turbo Tested 15W-40 is recommended for TURBO diesel engines of industrial vehicles, earthmoving machinery and all types of light and heavy transport vehicles on the road.
The Wladoil Turbo Tested 15W-40 exceeds the API specifications CI-4 and ACEA E7 provided for engines with emissions abatement system, both EGR (Exhaust Gas Recirculation) and SCR (Selective Catalytic Reduction).
The particular additives of the Wladoil Turbo Tested SAE 15W-40 ensures:
- definitely superior performance compared to conventional diesel lubricants in every climate and in any operating condition
- easy cold starts
- strong lubricating veil at all operating temperatures
- reduction of oil consumption with "long-drain" properties
- elimination of seasonal oil changes
- increase in engine output and less maintenance
- no inconvenience for cold sludge in intermittent low-speed operating conditions (stop and go)
- responds to the strictest requirements of manufacturers in terms of protection against "bore polishing" (mirror polishing of the cylinder)
Specifics and approvals:
API CI4 / CH4 / CG4 / CF4 / SL
ACEA E7-08 Issue 2
MB Approval 228.3
MAN M 3275-1
VOLVO VDS3
TURBO TESTED LT LE DIESEL OIL Sae 15W-40; Sae 10W-40; Sae 10W-30
The Wladoil TURBO TESTED LT Diesel Oil range is a series of lubricants of the type XHPDO MID S.A.P.S. - Medium ash- and LEDL - Low Emission Diesel Lubricants, for supercharged and aspirated commercial diesel engines. Exceptional in its performance, it is a lubricant specially formulated with special and selected base oils for use in modern diesel engines operating in the most severe conditions and over long distances.
It is particularly suitable for vehicle engines with exhaust after-treatment systems, equipped with latest-generation particulate filters and exhaust gas recirculation system (EGR).
In addition to its potential capacity to reduce fuel consumption, the Wladoil TURBO TESTED LT LE Diesel Oil gives the possibility of being able to prolong the interval of the oil change, and with its exceptional anti-wear that eliminates the "bore polishing", it ensures a longer life to all parts of the engine.
The Wladoil TURBO TESTED LT LE Diesel Oil is especially recommended for all commercial vehicle diesel engines when they operate under the most severe operating and temperature conditions.
It is indicated for heavy motorway autotraction and for vehicles operating on construction sites, in quarries, in agriculture.
The advantages deriving from the use of the Wladoil TURBO TESTED LT LE Diesel Oil can be highlighted in the following points:
- maximum engine cleanliness
- maximum lubricity even in high-speed diesel engines
- high fuel economy and reduced top-up between one gearbox and the next
- oil change interval extension to the maximum allowed by the engine manufacturers
- excellent cold starts even in very rigid climates
- significant reduction of emissions from exhaust pipes
- low ash content that helps avoid catalyst poisoning and blockage of filtration systems
- maximum compatibility with exhaust emissions abatement systems and exhaust gas recirculation systems.
Specifics and approvals:
ACEA E9-08, E7-04 issue 2
API CJ-4 / CI-4+ / CI-4 / SM/CF
MB 228.31
MAN M3275
VOLVO VDS-4
RENAULT TRUCKS RLD-3
UHP DIESEL OIL Sae 10W-40
The Wladoil UHP Diesel Oil 10W-40 is a UHPDO type lubricant for diesel engines running at high speed.
Exceptional in its performance, it is a lubricant precisely formulated with special and selected synthetic base oils for use in modern turbocharged diesel engines operating in the most severe conditions and over long distances. It is especially recommended for EURO IV engines.
In addition to its potential capacity to reduce fuel consumption, the Wladoil UHP Diesel Oil 10W-40 gives the possibility of being able to prolong the interval of the oil change, and due to its exceptional anti-wear power, it ensures a longer life to all parts of the engine.
The Wladoil UHP Diesel Oil 10W-40 is especially recommended for all heavy transport diesel engines when they act under the most severe operating and temperature conditions.
The advantages deriving from this can be highlighted in the following points:
- cleaner engines
- fuel economy and few top-ups between one change and the next
- oil change interval extension to the maximum allowed by the engine manufacturers
- better cold starts
Specifications and approvals:
API CI4 / CF
ACEA E7-04 ACEA E4-07
Mercedes Benz 228.5
MAN M3277 MAN MTU Type 3
VOLVO VDS 3 SCANIA LDF 2
RENAULT TRUCKS RXD / RLD-2
Approved in accordance with page 228.5 of the Mercedes-Benz specifications for consumer products
UHP-LS A DIESEL OIL Sae 10W-40
The Wladoil UHP-LSA Diesel Oil is a lubricant of the UHP Low Saps type - Low ash - and LEDL - Low Emission Diesel Lubricants, for supercharged and aspirated commercial diesel engines.
Exceptional in its performance, it is a lubricant entirely formulated with special and selected synthetic base oils for use in modern diesel engines operating in the most severe conditions and over long distances.
It is particularly suitable for engines that must comply with the emissions limits set by EURO IV and EURO V. It can also be used in EURO III or previous engines.
It is suitable for the use on vehicles with exhaust after-treatment systems, equipped with latest-generation particulate filters. In addition to its potential ability to reduce fuel consumption, the Wladoil UHP-LSA Diesel Oil gives the possibility of being able to prolong the interval of the oil change, and due to its exceptional anti-wear that eliminates the "bore polishing", it ensures a life longer to all parts of the engine.
The Wladoil UHP-LSA Diesel Oil is particularly recommended for all diesel engines of commercial vehicles and buses when they act in the most severe operating and temperature conditions.
Il Wladoil UHP-LSAIt is indicated and approved by Daimler and MAN also for gas engines (CNG) Compressed Natural Gas).
The advantages deriving from the use of Wladoil UHP-LSA Diesel Oil can be highlighted in the following points:
- maximum engine cleanliness
- maximum lubricity even in high-speed diesel engines
- high fuel economy and reduced top-up between one change and the next
- oil change interval extension to the maximum allowed by the engine manufacturers
- excellent cold starts even in very cold climates
- significant reduction of emissions from exhaust pipes
- low ash content that helps avoid catalyst poisoning and filtration system blockage
Specifics and approvals:
ACEA: E4 / E6 / E7 / E9-12
API: CJ-4
VOLVO: VDS-4
RENAULT: RLD-3
DAIMLER: MB-Approval : 228.51 / 228.31
MAN: M3477 / M3575 / M3271-1
CATERPILLAR: ECF-3
UHP-LS DIESEL OIL Sae 10W-40
The Wladoil UHP-LS Diesel Oil is a lubricant of the UHP Low Saps type - Low ash - and LEDL - Low Emission Diesel Lubricants, for supercharged and aspirated commercial diesel engines.
Exceptional in its performance, it is a lubricant precisely formulated with special and selected synthetic base oils for use in modern diesel engines operating in the most severe conditions and over long distances.
It is particularly suitable for engines that must comply with the emissions limits set by EURO IV and EURO V. It can also be used in EURO III or previous engines.
It is suitable for the use on vehicles with exhaust after-treatment systems, equipped with latest-generation particulate filters.
In addition to its potential ability to reduce fuel consumption, the Wladoil UHP-LS Diesel Oil gives the possibility of being able to prolong the interval of the oil change and with its exceptional anti-wear power that eliminates the "bore polishing" ensures a life longer to all parts of the engine.
The Wladoil UHP-LS Diesel Oil is particularly recommended for all diesel engines of commercial vehicles and buses when they act under the most severe operating and temperature conditions.
It is indicated and approved by Daimler and MAN also for gas or CNG engines. The advantages deriving from the use of Wladoil UHP-LS Diesel Oil can be highlighted in the following points:
- maximum engine cleanliness
- maximum lubricity even in high-speed diesel engines
- high fuel economy and reduced top-up between one change and the next
- oil change interval extension to the maximum allowed by the engine manufacturers
- excellent cold starts even in very rigid climates
- significant reduction of emissions from exhaust pipes
- low ash content that helps avoid catalyst poisoning and filtration system blockage
Specifics and approvals:
ACEA: E6, E7, E9
API: CI4
DAIMLER: MB Approval: 228.51 - 226.9
MAN: M3477, M3271-1 approval
VOLVO: VDS3, CNG
RENAULT TRUCKS: RXD, RLD-2, RGD
DIESEL MP SPECIAL SAE 15W-40
Synthetic oil formulated with a synthetic base particularly studied for aspirated or supercharged diesel engines with pre-chamber or direct injection. It is recommended for TURBO diesel engines of industrial vehicles, earthmoving machinery and all types of light and heavy transport vehicles on the road. It is formulated with special detergent additives, dispersants, antioxidants, anti-wear, anti-corrosion, anti-foam, anti-rust.
Oil change recommendations:
- maximum replacement interval as indicated by the manufacturers
- 300/400 hours of work based on the type of travel or use of the vehicle
The particular addition of Wladoil Diesel MP Special SAE 15W / 40 ensures:
- definitely superior performance compared to conventional diesel lubricants in every climate and in any operating condition
- easy cold starts
- strong lubricating veil at all operating temperatures
- reduction of oil consumption and accentuated "long-drain" properties
- elimination of seasonal oil changes
- increase in engine output and less maintenance
- no inconvenience for cold sludge in intermittent low-speed operating conditions (stop and go).
It complies with the strictest manufacturers' requirements in terms of protection against "bore polishing" (mirror polishing of the cylinder)
Specifics and approvals:
API CI4 / CH4 / CG4 / CF4 / SL
ACEA E7-08 Issue 2 ACEA A3 / B4 - 10
MB Approval 228.3
MAN M 3275-1
MTU Category 2
VOLVO VDS3
DIESEL D3 SAE (10W) 10W-20, 10W-30, 30, 40, 50
High quality unigrade or multigrade oils designed for both aspirated and supercharged diesel engines, hydraulic systems and transmissions. They are formulated with precious bases with high viscosity index and low pour point.
The Wladoil Diesel D3 products are recommended for diesel engines also operating in harsh conditions or subject to high wear and tear, in industrial applications, for earth-moving machines, etc.
They are formulated with special detergent additives, dispersants, antioxidants, anti-wear, anti-corrosion, anti-foam, anti-rust, which guarantee good engine protection and low consumption.
The Wladoil Diesel D3 in gradation (10W) 10W-20 is also suitable for the use of hydraulic circuits of tractors, mechanical blades, bulldozers, etc.
The Wladoil Diesel D3 in gradation 10W-30 is recommended for hydraulic systems and "Powershift" transmissions of the most modern machines: excavators, earth-moving blades, etc.
The products in the range are formulated with highly refined bases and latest generation additives that guarantee:
- exceptional anti-wear action
- remarkable resistance to oxidation and thermal degradation
- excellent cleaning and dispersing power
UNIGRADE PRODUCTS
API SL – CF – CF2
MIL-L-2104D
MIL-L-46152
GRADESI (10W) 10W-20 and 10W-30
API SL – CF – CF2
ACEA E1
MB 227.1
ALLISON C4
AGRI UNI SAE 10W-30, 15W-40
WLADOIL AGRI UNI are lubricants suitable for all components of agricultural tractors. They belong and to the STOU category (Super Tractor Oil Universal) and are capable of lubricating diesel engines, gearboxes, differentials, gearboxes, power take-offs, hydraulic systems, brakes and clutches in an oil bath.
Available in two viscosity grades, they exceeds the strictest manufacturer specifications.
They are mineral based lubricants containing special additives that give the product detergent and dispersant properties that allow the soot particles and foreign substances to be effectively suspended in suspension.
They are suitable for all types of engines used in the agricultural sector, as well as transmission / clutch units, oil bath brakes, hydraulic and mechanical power take-offs, hydraulic circuits, etc.
The main features are:
- high dispersing and detergent characteristics
- excellent oxidation stability
- high viscosity index with good use even at low temperatures
- excellent anticorrosive and anti-wear properties
- high "antistick and antisquawk" properties that reduce noise
Specifics and approvals:
ENGINE
API CG-4, ACEA E3, API SF
STOU
Ford M2C 159B/C
New Holland 82009201/2/3
John Deere J27
Massey Ferguson CMS M1145, 1144, 1139
TRANSMISSION
API GL4
ZF TE ML 06A B, C and 07B
UTTO
Ford M2C 134D
Case New Holland MAT 3525 and 3526
John Deere J20C
Massey Ferguson CMS M1143, 1135
MULTISERVICE AC4 SAE 10W-30
The Wladoil Multiservice AC4 is a multifunctional lubricant designed to meet the various needs of agricultural and industrial engines with one single product.
The Wladoil Multiservice AC4 is especially recommended for all diesel engines of both heavy and agricultural transport. In particular it is suitable:
- for the engine
- for oil bath brakes with noise reduction
- for clutches of power take-offs, where it guarantees progressive couplings that limit wear
- for the components of hydraulic circuits
It is made with severely refined paraffinic bases, specific additives that guarantee high performance, and with viscosity index enhancers that minimize variations in performance with temperature.
The low pour point allows it to be used even at low temperatures.
In addition, corrosion inhibiting, anti-rust and anti-wear packages added to the Wladoil Multiservice AC4 ensure a longer life to all parts of the engine.
Specifics and approvals:
API CI4 / CH4 / CG4 / CF4 / SL
ACEA E7-08 Issue 2 - A3 / B4 - 10
MB Approval 228.3
MAN M 3275-1
VOLVO VDS3
MACK EO-M, EO-M Plus, EO-N
RENAULT RLD-2