- For more information contact us!
- +390444232300
- wladoil@wladoil.com
Gearbox & Differential Gears
13 June 2017
Additives & Spray
16 June 2017
Industrial Greases
Grease 200F EP NLGI 0/1/2/3
Lithium grease for extreme pressures. Read more...
Grease Gold 200 FN 2
Graphite grease. Read more...
Red Adhesive Gel
Grease for assembly of gaskets and mechanical parts. Read more...
Grease MR /3 NLGI 3
Lithium grease EP. Read more...
Grease HS 50 S NLGI 1/2
High speed rolling bearing grease. Read more...
Grease HS 100
Special grease for heavily loaded rolling bearings. Read more...
Grease HMR 00/2 NLGI 2
Special grease for hammers. Read more...
Grease F.H.T. Special 2 NLGI 2
Special infusible grease. Read more...
Grease ST/ZN 2 NLGI 2
Water repellent grease. Read more...
Grease Cs Corone NLGI 2
Special grease for special gears. Read more...
Grease Moly Sint 2 NLGI 2
Infusible grease with molybdenum bisulphide. Read more...
Grease Pneumat 0 / 00 NLGI 00
Pumping fluid grease. Read more...
Grease Moly LT Plus NLGI 1/2
Molybdenum bisulphide grease. Read more...
Grease CU 1000 NLGI 2
Infusible copper grease. Read more...
Greasil Special K4 NLGI 3
Silicone grease. Read more...
Grease RDF/O NLGI 0
Special grease for motor vehicles and industry. Read more...
Grease Super Complex EP NLGI 1/2
Complex lithium soap grease. Read more...
Grease Blue NLGI 2
Special grease for extreme pressures. Read more...
Grease Active CE NLGI 2
Water resistant grease. Read more...
Grease Super RS NLGI 2
High temperatures resistant grease. Read more...
Grease Alugreen EP E
Read more...
Grease Universal T NLGI 2
Teflon grease. Read more...
GREASE 200F EP NLGI 0/1/2/3
Wladoil Grease 200 F EP SINT are multifunctional lithium greases formulated with synthetic bases and special additives that give good thermal and mechanical stability.
The Wladoil Grease 200 F EP SINT, due to their particular characteristics, have their most important use in the lubrication of sliding and friction bearings subjected to vibrations and high loads.
They can be used in all EP-type applications, such as lubricating gears and mechanisms subjected to heavy loads when avoiding the use of fluid oil.
Their main features are:
- high resistance to mechanical stress and high loads
- excellent oxidation resistance
- excellent anti-wear, anti-corrosion and anti-rust protection
- excellent adhesive power
- good resistance to water leaching action
- wide operating temperature range.
The NLGI 0 gradation also possesses excellent pumpability.
GREASE GOLD 200 FN 2
Special grease with anhydrous calcium soap containing finely dispersed graphite. It is recommended for general lubrication and stabilization of flat bearings and various parts that are very worn or with poor surface finish, presses, gaskets, support washers etc. It is not suitable for rolling bearings. It is strongly water repellent.RED ADHESIVE GEL
Wladoil RED ADHESIVE GEL is a product designed to facilitate the assembly of gaskets and mechanical parts.
Wladoil RED ADHESIVE GEL is indicated in general assembly operations of mechanical parts or in the positioning of gaskets. Some possible applications are:
- assembly of gaskets, even very elaborate and in a vertical position
- insertion of O-rings
- coupling of bushes with pins
- positioning of bearings, thrust washers and other small parts
The product is perfectly compatible with all types of lubricants previously used in the engine, both mineral and synthetic.
The main features of Wladoil RED ADHESIVE GEL are:
- greater protection at the start of processing
- perfect compatibility with synthetic and mineral base oils, also for ATF oils
- complete solubility in lubricants, the excess is in this way incorporated into the oil without creating any kind of inconvenience
- it maintains the adhesive power even at relatively high temperatures
- does not contain hazardous substances or solvents
- free of solid components
To use the Wladoil RED ADHESIVE GEL, follow these instructions:
- apply a layer of RED ADHESIVE GEL to the surfaces to be joined by hand or brush
- in the case of vertical gaskets (engine heads, automatic transmissions, etc.) use the product on the metal part
- couple the elements by exerting slight pressure
Finish the assembly.
GREASE MR /3 NLGI 3
Wladoil Grease MR 3 is a special grease composed of a highly refined low viscosity base and antioxidant, anti-rust and E.P agents.
The thickener is a lithium soap.
Thanks to its consistency and to the special additive package Wladoil Grease MR 3 is particularly suitable for use on wheel hub bearings of industrial vehicles and for general greasing of industrial vehicles if no other specific greases are required.
Its main features are:
- excellent stability to mechanical stress that prevents oil leakage
- high resistance to oxidation which guarantees a long life of the grease
- high resistance to water washout
- good anti-rust properties and load resistance (E.P.)
Recommended temperature of use: -20 / + 120 °C
Duration: Earth and agricultural machines: 50 hours
Industrial vehicles: 50,000 km
GREASE HS 50 S NLGI 1/2
Special grease consisting of a synthetic base oil with a very low viscosity and low pour point, thickened with a particular complex lithium-based soap containing a balanced package of additives that enhance its lubricating power and EP.
The Wladoil Grease HS 50 - S is mainly intended for the lubrication of rolling bearings and radiating supports operating under high and very fast loads (up to 60,000 rpm, speed factor> 1,000,000).
It is specifically suitable where good lubrication is required even at low temperatures as its exceptional lubricating characteristics remain unchanged in a temperature range between -55 ° C and + 130 ° C.
Wladoil Grease HS 50 - S is a grease that does not tend to gum, does not swell tires or plastic materials in general. To obtain the best performance, it is advisable to carefully clean the parts to be lubricated in order to remove residues of other greases with different base or protective during storage, as they could alter the original characteristics of the grease. It is also recommended the use, given its composition, to lubricate components operating in a humid environment.
It is recommended to keep the containers tightly closed, when they are not used, to avoid any pollution of the product by dust or other foreign substances.
GREASE HS 100
Special grease consisting of a synthetic base oil with very low viscosity and low pour point, thickened with a special soap based on 1.2 calcium hydroxystearate and containing a balanced package of additives that enhance its lubricating power and EP.
The Wladoil Grease HS 100 is mainly intended for the lubrication of rolling bearings and radiating supports operating under high and very high loads (up to 60,000 rpm).
It is specifically suitable where good lubrication is required even at low temperatures, as its exceptional lubricating characteristics remain unchanged in a temperature range between -40 ° C and +120 ° C
Wladoil Grease HS 100 is a grease that does not tend to gum, does not swell tires or plastic materials in general. To obtain the best performance, it is advisable to carefully clean the parts to be lubricated in order to remove residues of other greases with different base or protective during storage, as they could alter the original characteristics of the grease.
It is also recommended the use, given its composition, to lubricate components operating in a humid environment.
It is recommended to keep the containers tightly closed, when they are not used, to avoid any pollution of the product by dust or other foreign substances.
GREASE HMR 00/2 NLGI 2
Wladoil Grease HMR is a semi-synthetic special grease obtained from a specific lubricating base, thickened with a complex aluminum soap and additized with molybdenum disulphide, graphite and bronze powder.
The Wladoil Grease HMR has been specially designed for use in pneumatic hammers, breakers and drillers. This type of machining, very burdensome, requires a very specific lubrication of the mechanical parts, and the Wladoil Grease HMR guarantees a correct treatment of the mechanical parts, ensuring its proper functioning and its protection.
The Wladoil Grease HMR, due to its particular composition, adheres very strongly to the metal surfaces to be treated, ensuring the formation of a very resistant fllm that protects the moving parts from wear.
The product can be used in a wide temperature range, it is water resistant and has excellent anti-rust and anti-corrosion properties.
Its main features are:
- high cut resistance;
- excellent and constant behavior at high and low temperatures;
- high adhesiveness together with good sliding properties;
- long service life;
- good water repellent, anti-rust and anti-corrosion properties;
- excellent EP characteristics
- excellent "anti Stick-Slip" behavior which guarantees no jamming at low speeds and under heavy loads;
- excellent protection against oxidation, scratches and wear on metal surfaces.
GREASE F.H.T. SPECIAL 2 NLGI 2
Wladoil Grease FHT SPECIAL 2 is a special infusible grease obtained from a selected base oil thickened with particular synthetic substances that can not be affected by temperature.
The specific use of Wladoil Grease FHT SPECIAL 2 is in the lubrication of flat or rolling bearings operating at exceptionally high temperatures, in the conditions in which the other greases are not able to withstand.
GREASE ST/ZN 2 NLGI 2
Wladoil grease ST / ZN 2 is a special grease based on anhydrous calcium formulated with special thickeners and with the addition of zinc and titanium oxides.
It is light in color, pomatose, pumpable, very adhesive and strongly water repellent.
It is indicated for the lubrication of joints, sleeves, cables under sheath, especially in the presence of high humidity and in all those applications where the grease dispensing intervals are noticeably spaced.
GREASE CS CORONE NLGI 2
Wladoil grease CS CORONE is a special grease formulated with a special molybdenum graphite / bisulphide mixture, with metallorganic additives, resistant to high pressures and aggressive atmospheric agents.
CS CORONE forms an extremely tough and adhesive film that is considered a real "plating".
Wladoil grease CS CORONE thanks to its special characteristics is particularly suitable for cylindrical, tapered, helical gears, racks, chain conveyors, toothed rods, sliding and roller supports, wire ropes.
In the case of large toothed crowns and subjected to high loads such as mills or ovens and driers, it is used as a "first use lubricant".
Wladoil grease CS CORONE, when applied to the ropes, performs in addition to the lubricating action also the "sealant" one, which prevents damage resulting from the corrosive action of atmospheric agents.
Wladoil grease CS CORONE is applied by hand with a spatula or a hard brush on gears or surfaces in general. For the ropes one can resort to the aid of a glove.
The surface to be lubricated must be covered with great care in all its parts. Before application, a careful cleaning of the surface with volatile solvents is recommended.
GREASE MOLY SINT 2 NLGI 2
IWladoil grease Moly Sint is a special infusible grease obtained from a solvent-refined mineral base thickened with an inert component and added with an anti-wear, anti-rust, antioxidant package with the addition of molybdenum disulfide in colloidal dispersion and other solid components lubricants.
The Wladoil grease Moly Sint is thermally stable and resistant to high loads allowing perfect lubrication even at high temperatures under conditions of extreme pressure.
Thanks to its characteristics, the Moly Sint is successfully used as a lubricant for rolling and sliding bearings, both slow and heavily loaded, of aerial conveyors of painting systems, of trolleys for ovens in the ceramic industry where it ensures perfect lubrication up to temperatures operating temperature of 250 ° C, making maintenance operations significantly less frequent.
GREASE PNEUMAT 0 / 00 NLGI 00
Wladoil Grease PNEUMAT 00 is a special grease composed of a highly refined low viscosity base and antioxidant, anti-rust, anti-friction and E.P.
Wladoil Grease PNEUMAT 00 is a special grease composed of a highly refined low viscosity base and antioxidant, anti-rust, anti-friction and E.P.
Its main features are:
- excellent pumpability even at low temperatures
- suitability for use in systems with long distances lubrication system / parts to be lubricated
- practically zero tendency to the lubrication line clogging, even in very thin pipes, thanks to its extreme homogeneity and the absence of solid additives
- good anti-corrosion, antioxidant and load-bearing properties (E.P.)
- excellent anti-friction characteristics thanks to the fluidity of the base oil and the additives used.
Recommended operating temperature: -40 / + 100 ° C
GREASE MOLY LT PLUS NLGI 1/2
Wladoil Grease MOLY LT PLUS is a high performance multipurpose grease based on a lithium soap containing molybdenum disulfide and a balanced package of antioxidant, anti-rust and EP (extreme pressure) additives. It is prepared according to a patented formula that ensures perfect homogenization of the various components. The Wladoil Grease MOLY LT PLUS, for its exceptional characteristics, has a wide range of applications and can also be used for lubrication "for life". It is recommended for lubricating bushings, normal or supercharged bearings, operating at both low and high speeds, in humid environments, etc. It is suitable for lubricating gyroscopes, in the aerospace industry, on machine tools and textiles, on fans, centrifuges, electric motors, household appliances, cranes, conveyors, tractors, pumps, linkages, rolling mills, cross joints and homokinetic joints. The Wladoil Grease MOLY LT PLUS stands out from the common greases for its excellent resistance to the loads of the lubricating film that interposes between the surfaces in reciprocal friction, therefore it reduces wear and makes the machinery quieter. The Wladoil Grease MOLY LT PLUS allows to delay the delivery frequencies of the grease from the lubricating components as it guarantees an effective protection of the machinery. The Wladoil Grease MOLY LT PLUS is available in the gradations N.L.G.I. 1 and 2 to allow an optimal choice according to the type of delivery system. Molybdenum disulfide contained in Wladoil Grease MOLY LT PLUS meets MIL-L-7899 Amd 1-a / a / AF symbol NATO S-740 (MoS2)GREASE CU 1000 NLGI 2
Wladoil grease CU / 1000 is an infusible "compound" obtained from a solvent-refined mineral base, thickened with an inert component and additived with a specific balanced, wear-resistant and sub-micronized copper powder and other self-lubricating products.
Copper content: 40%
Wladoil grease CU / 1000 is widely used in the lubrication of nuts and bolts, threaded parts, valves and other parts subjected to static loads, at very high temperatures or operating in a corrosive atmosphere.
Wladoil grease CU / 1000 can be applied by brush or paintbrush on previously cleaned and degreased surfaces.
The particular combination of solid lubricants present, ensures:
- perfect and complete adherence to surfaces
- total separation of components in contact
- easier assembly of the treated parts
- non-destructive disassembly of screw connections
inalterability of the lubricating film even for long periods of operation at high temperatures.
GREASIL SPECIAL K4 NLGI 3
Wladoil Greasil Special K 4 consists of a medium viscosity silicone fluid and a synthetic thickener that thanks to their properties of chemical inertness, oxidation stability, low viscosity coefficient, give the product characteristics that remain unaltered in a wide range of temperature.
The Wladoil Greasil Special K 4 finds application where traditional products undergo alterations that can damage the equipment and the materials on which they are applied.
The Wladoil Greasil Special K 4 is suitable for a wide range of applications:
- Lubrication of special equipment subjected to high and low temperatures
- Dielectric and protective of electrical and electronic systems
- Lubricating and protective gaskets, excluding silicone based ones
- Lubrication of joints, faucets and valves subject to high temperatures, acids and vacuum conditions.
Meets the following specifications FDA Section 172.121 / 2589 Total non-toxicity of the basic fluid lubricant
FDA Section 121 / 2586Total non-toxicity of all non-oily components
GREASE RDF/O NLGI 0
Wladoil grease RDF 0 is a special grease consisting of a synthetic base and a complex type thickener.
Its main properties are:
- excellent resistance to oxidation in any type of operating condition (shaking and shuffling)
- high stability to mechanical stress: it ensures optimal lubrication even after long periods of operation
- a new anti-rust additive ensures excellent protection of lubricated metal surfaces, even in a strongly humid environment
- its particular additive allows a significant reduction of the friction coefficient between metal surfaces, thus reducing the operating temperature
- easy pumpability even at low temperature which allows excellent lubrication within a wide temperature range.
he Wladoil grease RDF 0 is particularly suitable for:
- lubrication of gears in closed casing of medium - small geared motors
- kinematic couplings consisting of worm screw - helical wheel in white steel
- llubrication of closed box components that require the use of special lubricants with physical characteristics similar to those of semi-fluid greases or high viscosity oils, such as: greasing boxes for pneumatic electric tools, household appliances, tooth joints of various types, presses for vulcanizing rubber, etc.
GREASE SUPER COMPLEX EP NLGI 1/2
Wladoil Grease Super Complex EP are newly formulated lubricating greases based on a complex soap, containing special EP additives (extreme pressures).
These additives are inserted to obtain, where possible, lubrication performances very similar to molybdenum disulfide and graphite (limit lubrication). The Wladoil Grease Super Complex E.P. due to their high drop point which is higher than 300 ° C can be used with excellent results in the bearings of electric motors, of fume extractor of rolling mills, in the bearings of conveyors passing through tunnels or ovens, with operating temperatures of up to 250 ° C, without leaving on the metal surfaces deposits or carbon residues.
The Wladoil Grease Super Complex E.P. are distinguishable from ordinary greases for chemical and thermal stability, which allows, depending on the temperature of use, a long service life.
The remarkable resistance to water and leaching and the excellent anti-corrosive properties complete the characteristic profile of these products.
At room temperature they can be used in bearings up to a maximum speed of 30,000 rpm.
The Wladoil Grease Super Complex E.P. are available in the gradations N.L.G.I. 1 and 2, to allow an optimal choice according to the type of delivery system.
GREASE BLUE NLGI 2
Wladoil grease BLUE is a special grease consisting of a mineral base and a semi-synthetic ester. The thickening soap is lithium based.
The particular additives added give the product excellent properties, antioxidant, anti-rust, adhesive.
Its main properties are:
- excellent adhesiveness that allows a more effective and lasting lubrication,
- excellent resistance to both salty and sweet water.
- excellent resistance to aging
Wladoil grease BLUE is a very persistent grease suitable for the lubrication of vehicles, industrial, construction and agricultural machines. It resists centrifugation.
Given its characteristic of great resistance to water it is recommended for very heavy use in very humid environments.
The great adhesiveness and the marked EP properties, antioxidants, and anti-rust agents, allow a considerable prolongation of the lubrication intervals.
For particular environmental conditions (cold) there is also a version of the Wladoil Grease Blue, with higher penetration values.
GREASE ACTIVE CE NLGI 2
Wladoil grease Activ CE is a special water-resistant grease thickened with anhydrous calcium soap with the addition of antioxidant, anti-rust and tackifying additives.
Active structural stability.
Wladoil grease Activ CE is a very persistent grease suitable for the lubrication of vehicles, industrial, construction and agricultural machines.
Given its characteristic of great resistance to water (even at close to boiling temperature) it is recommended for very heavy use in very humid environments.
The great adhesiveness and the marked EP properties allow a considerable extension of the lubrication intervals.
Operating temperature: -25 ° C / + 130 ° C
GREASE SUPER RS NLGI 2
Purposefully designed special grease formulated with a complex soap with the addition of a semi-synthetic oil with a high viscosity index which gives the product characteristics far superior to the normal greases on the market today.
Based on its characteristics, the Wladoil Super RS is suitable for any type of lubrication from low to high temperatures in many sectors ranging from automotive, agriculture and the mechanical industry.
It is particularly recommended for the lubrication of bearings of all kinds, especially if subjected to high loads and high temperatures.
It has an excellent adhesiveness that allows a more effective and long-lasting lubrication, and it is ideally resistant to both salty and sweet water.
It also contains a special EP additive which, when possible, allows performances similar to those of molybdenum bisulphide and graphite but with a light color in accordance with current market trends.
The Wladoil Super Grease RS has an exceptional resistance to aging even in the most severe operating conditions, (high temperatures - presence of pollutants) which therefore allows a considerable prolongation of the lubrication cycles.
It is available not only in normal packs but also in 600 cc cartridges. with manual or pneumatic pump.
GREASE UNIVERSAL T NLGI 2
Wladoil Grease UNIVERSAL T is a "multipourpose" special grease composed of base oil subjected to very high refining, thickened with a complex lithium soap with EP additives, antioxidants, anti-rust, anti-wear, and a suitable quantity of P.T.F.E. with 90% <6 micron particle size.
The high lubricity, its water repellency and metal affinity ensure that the lubricating film of Wladoil Grease UNIVERSAL T adheres to the surfaces forming a homogeneous layer with a low friction coefficient and with poor abrasive properties.
Thanks to its structural characteristics it can be considered a universal lubricating grease suitable for the lubrication of medium speed kinematisms.
It can be used for general greasing of construction machinery, in the mechanical industry, in medium-speed bearings.
Operating temperatures: -20 / +230 ° C