- For more information contact us!
- +390444232300
- wladoil@wladoil.com
Whole Oil
14 June 2017
Food Lubricants
14 June 2017
Emulsifiable oil
Biosint 56 (Biosint Serie)
Emulsifiable oils and fluids for cutting and grinding. Read more...
Emulcut 95
Coolant free of mineral oil for cutting and grinding. Read more...
Emulcut EP
Coolant free of mineral oil for cutting and grinding. Read more...
Emulcompound 04
Coolant for cutting and grinding, boron free. Read more...
Emulsol 37
Coolant for cutting and grinding, in hard waters. Read more...
Emulsol 37 CF
Coolant for cutting and grinding, in hard water without chlorine. Read more...
Emulsol 33
Coolant for cutting and grinding. Read more...
Emulsol M 95
Coolant for cutting and grinding. Read more...
Emulsol M 95 CF
Coolant for cutting and grinding without chlorine. Read more...
Emulsol MM ARF
Coolant for cutting and grinding. Read more...
Emulsol MM CF
Coolant for cutting and grinding without chlorine. Read more...
Emulsol MM ARF DH
Coolant for cutting and grinding specific for hard waters. Read more...
Emecol 55 CF
Coolant based on esters deriving from renewable sources. Read more...
Emuldraw 6M
Coolant for drawing and drawing. Read more...
Emuldraw C D68
Coolant for drawing and drawing. Read more...
Emuldraw C
Coolant for drawing and drawing. Read more...
Emuldraw 59
Coolant for drawing and drawing. Read more...
Soluble BK
Coolant for grinding. Read more...
Soluble RTR
Coolant for grinding. Read more...
BIOSINT 56 (BIOSINT SERIE)
The Wladoil BIOSINT 56 is a semi-synthetic cooling lubricant with EP characteristics which, in water, forms a semi-transparent emulsion of high stability even in hard water.
It has a strong anti-rust power even at low concentrations of use and it is formulated with a very effective bactericidal package which increases its duration in emulsion. It is suitable for medium-hard machining operations on all ferrous metals, including stainless steel, and non-ferrous metals such as aluminum and yellow alloys.
The recommended rates of use vary depending on the degree of processing difficulty, type of water and operating conditions. Typically suggested concentrations with medium/hard water are:
- carbon steel: 5 - 6%
- strongly alloyed steel: 5 - 8%
- stainless steel: 7 - 10%
- aluminum alloys: 4 - 6%
The main features of the product are:
- high stability even with hard water
- excellent anti-rust power even in conditions of high dilution
- stability over time and good operating life
- excellent resistance to the formation of bacteria
The following products, with different characteristics, are also part of the BIOSINT family:
BIOSINT 56 DH
The Wladoil BIOSINT 56 DH is a semi-synthetic lubricant with EP characteristics which in water forms a semi-transparent emulsion of high stability. It is particularly recommended for hard water. It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective bactericidal package which increases its duration in emulsion.
BIOSINT D30 CF
The Wladoil BIOSINT D30 CF is a semisynthetic chlorine-free lubricant with EP characteristics which in water forms a semi-transparent emulsion that shows high stability even in hard water.
It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective bactericidal package which increases its duration in emulsion.
BIOSINT D40
The Wladoil BIOSINT D40 is a semi-synthetic lubricant with EP characteristics which in water forms a semi-transparent emulsion that shows high stability even in hard water.
It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective bactericidal package which increases its duration in emulsion.
BIOSINT 56 CF
It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective bactericidal package which increases its duration in emulsion.
BIOSINT SB 50
The Wladoil BIOSINT SB 50 is a semi-synthetic refrigerant, free from boron and chlorine, with EP characteristics which, in water, forms a semitransparent emulsion that shows high stability even in hard waters.
It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective bactericidal package which increases its duration in emulsion.
BIOSINT SB 60
The Wladoil BIOSINT SB 60 is a semi-synthetic, boron-free lubricant with EP characteristics which, in water, forms a semitransparent emulsion that shows high stability even in hard water.
It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective bactericidal package which increases its duration in emulsion.
BIOSINT K94
The Wladoil BIOSINT K94 is a semi-synthetic lubricant with EP characteristics that in water forms a semitransparent emulsion that shows high stability even in hard water.
It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective package of bactericides which increases its duration in emulsion.
BIOSINT 12S
The Wladoil BIOSINT 12S is a semi-synthetic lubricant with EP characteristics which in water forms a semi-transparent emulsion that shows high stability even in hard water.
It has a strong anti-rust power even at low concentrations of use and is formulated with a very effective bactericidal package which increases its duration in emulsion.
EMULCUT 95
Wladoil EMULCUT 95 is a lubricating oil free from mineral oil, nitrites, secondary amines, chlorine and boron, soluble in water. It is formulated with special synthetic lubricants and cutting additives which make it particularly suitable for a wide range of operations with very heavy chip removal and materials difficult to work with, including yellow alloys and aluminum.
In water it forms a colorless transparent solution even with hard water. The recommended utilization rates vary according to the degree of processing difficulties, the type of materials to be processed, the type of water and the operating conditions.
Typically suggested concentrations with medium/hard water range from 4 to 8%.
The main features are:
- Control of rust and decay
- Stability even in hard waters
- Inertia towards copper and its alloys
- Absence of mists and fumes during use
The product does not contain secondary amines, chlorine, boron.
EMULCUT EP
The Wladoil EMULCUT EP is a boron free lubricant that forms a milky emulsion of high stability, even in medium hard water, and with an exceptional anti-rust power.
It can be used in a wide range of chip removal operations, even heavy, on ferrous materials. It can also be used on yellow alloys where a specific product is not required.
The recommended rates of use vary depending on the degree of processing difficulty, type of water and operating conditions.
Typical suggested concentrations with medium/hard water are:
- Light processing 3 - 4 %
- Medium to heavy work 4 7 %
The main features of the product are:
- high stability even with hard water
- stability over time and good operating life
- excellent anti-rust power (Herbert test IP 125 at 3%)
- excellent resistance to the formation of bacteria and fungi
- absence of foam even in fresh water
- boron free
EMULCOMPOUND 04
Wladoil EMULCOMPOUND 04 is a semi-synthetic cooling lubricant with exceptional EP characteristics that in water forms a very stable microemulsion, even in hard ones.
It is formulated with a package of newly developed bactericides with a very low environmental impact.
The Wladoil EMULCOMPOUND 04 is used in a wide spectrum of operations with very heavy metal removal of ferrous and non-ferrous materials, including yellow alloys and aluminum.
The recommended rates of use vary depending on the degree of processing difficulty, type of water and operating conditions.
|
USE |
Aluminum and yellow alloys |
AVP steels and mild steels |
Alloy steels and stainless steel |
Cast iron |
Titanium alloys |
|
Reaming Milling Saw cutting |
3 % |
4 % |
4 % |
5 % |
4 % |
|
Automatic turning of single and multiple spindles |
3 – 4 % |
4 % |
5 % |
5 % |
6 % |
|
Drilling and threading |
4 % |
6 % |
8 % |
5 % |
10 % |
|
Tapping and broaching |
6 – 8 % |
10 % |
10 – 15 % |
5 % |
---- |
The main features of the product are:
- high stability even with hard water
- excellent anti-rust power even in conditions of high dilution
- it allows high cutting parameters
- stability over time and good operating life
- reduction of sludge formation as it does not react with the salts dissolved in the water
- excellent resistance to the formation of bacteria and fungi
- good separation properties for guide oils (W.Engine HDT series)
The following products, with different characteristics, are also part of the EMULCOMPOUND 04 family:
EMULCOMPOUND 04 CF 2
The Wladoil EMULCOMPOUND 04 CF 2 is a semisynthetic chlorine-free lubricant with exceptional EP characteristics that forms in water a very stable microemulsion, even in hard waters.
It is formulated with a package of newly developed bactericides with a very low environmental impact.
The Wladoil EMULCOMPOUND 04 CF 2 is free of chlorine, boron and secondary amines.
EMULCOMPOUND 04 DH
The Wladoil EMULCOMPOUND 04 DH is a semi-synthetic lubricant with exceptional EP characteristics that forms a highly stable microemulsion in water.
It is particularly suitable for hard water.
It is formulated with a package of newly developed bactericides with a very low environmental impact
EMULCOMPOUND 04 CF
Wladoil EMULCOMPOUND 04 CF is a semisynthetic chlorine-free lubricant with exceptional EP characteristics that forms a highly stable microemulsion in water, even in hard ones.
It is formulated with a package of newly developed bactericides with a very low environmental impact.
Wladoil EMULCOMPOUND 04 CF is free of chlorine, boron and secondary amines.
EMULSOL 37
Wladoil Emulsol 37 is a soluble oil with EP properties suitable for cutting and grinding all metals including yellow alloys.
Wladoil Emulsol 37 is formulated with synthetic lubricants, detergents, anti-corrosion and anti-rust additives and with special emulsifiers, that make it readily miscible in water giving rise to a stable emulsion from semi-transparent to transparent depending on the water hardness (also suitable in plants centralized).
It is particularly indicated for water with a high hardness, even higher than 50 ° F.
The emulsions are particularly resistant to bacteria and fungi; this quality gives them a long life and, consequently, they are particularly economical to use.
Wladoil Emulsol 37 is also used in heavy-duty cutting, turning, grinding and shearing of medium alloy steels, cast irons, aluminum and yellow alloys.
The recommended percentages of use vary according to the degree of difficulty in processing, the type of water and the operating conditions.
Typically suggested concentrations with medium hard water are:
- General cutting operations: 3 - 6%
- Challenging cutting operations: 6 - 8%
- Aluminum cutting: 6 - 8%
- Adjustment: 4%
The product has the following characteristics:
- excellent lubricating and cooling power, which increases tool life and ensures good finishes of the machined surfaces;
- absence of foam
- stability during the exercise
- good anti-rust properties
- good detergent properties
- good HSSE profile
EMULSOL 33
Wladoil Emulsol 33 is a soluble biostatic oil designed for the machining of chip removal and grinding of ferrous, non-ferrous and yellow alloys.
The emulsions are particularly resistant to bacteria and fungi; this quality gives them a long life and, consequently, they are particularly economical to use.
Wladoil Emulsol 33 is suitable for machining metal chips and for grinding ferrous, non-ferrous and yellow alloys.
Recommended percentages of use:
Cutting processing in general: from 4 to 6%
Adjustment: from 4 to 5%
Cast iron processing: from 4 to 6%
EMULSOL M 95
Wladoil Emulsol M 95 is a general purpose product suitable for cutting and grinding all metals including yellow alloys.
It is formulated with synthetic lubricants, detergents, anti-corrosion and anti-rust additives.
It contains emulgators that make it readily miscible in water giving rise to a stable emulsion from semi-transparent to transparent depending on the hardness of the water (also suitable in centralized systems).
It also shows excellent resistance to the formation of bacteria avoiding unpleasant odors.
Wladoil Emulsol M 95 is used in operations involving medium-heavy cutting, turning, grinding and shearing of medium alloy steels, cast irons, aluminum and yellow alloys.
The recommended percentages of use vary according to the degree of difficulty in processing, the type of water and the operating conditions.
Typically suggested concentrations with medium/hard water are:
- General cutting operations: 4 - 6%
- Challenging cutting operations: 7 - 10%
- Aluminum cutting: 6 - 8%
- Adjustment: 3 - 5%
It has the following characteristics:
- excellent lubricating and cooling power, which increases tool life and ensures good finishes of the machined surfaces;
- absence of foam
- stability during the exercise
- good anti-rust properties
- good detergent properties
- good HSSE profile
EMULSOL MM ARF
Wladoil Emulsol MM / ARF is a general purpose product suitable for cutting and grinding all metals including yellow alloys.
It is formulated with synthetic lubricants, detergents, anti-corrosion and anti-rust additives. It contains emulgators that make it readily miscible in water giving rise to a stable emulsion from semi-transparent to transparent depending on the hardness of the water (also suitable in centralized systems).
It also shows excellent resistance to the formation of bacteria avoiding unpleasant odors.
Wladoil Emulsol MM / ARF is used in operations with medium to heavy cutting, turning, grinding and shearing of medium alloy steels, cast irons, aluminum and yellow alloys.
LThe recommended percentages of use vary according to the degree of difficulty in processing, the type of water and the operating conditions.
Typically suggested concentrations with medium hard water are:
- General cutting operations: 4 – 6 %
- Challenging cutting operations: 7 – 10 %
- Aluminum cutting: 6 – 8 %
- Adjustment: 4 %
The product has the following characteristics:
- excellent lubricating and cooling power, which increases tool life and ensures good finishes of the machined surfaces;
- absence of foam
- stability during the exercise
- good anti-rust properties
- good detergent properties
- good HSSE profile
EMECOL 55 CF
W.EMECOL 55 CF is a cooling lubricant based on synthetic esters deriving from renewable sources and therefore free from mineral oil.
It is readily miscible in water and forms a milky-translucent emulsion.
he W.EMECOL 55 CF is suitable for all cutting operations of ferrous and non-ferrous materials, also difficult to work with, such as stainless steel, alloys with a high content of nickel, titanium, etc.
It is also used, due to its considerable cutting power, in the machining of aluminum and its alloys, even with high silicon content, where it allows to obtain exceptional surface finishes without creating any staining problems.
It is specifically formulated for use in operations using MAPAL tools. The recommended rates of use vary depending on the degree of processing difficulty, type of water and operating conditions.
|
USE |
% |
|
Milling / turning / drilling |
4 – 5 |
|
Tapping |
5 – 6 |
|
Boring |
4 - 6 |
|
Thread grinding |
5 - 8 |
|
Gear grinding |
5 - 8 |
The W.Emecol 55 CF, thanks to its particular formulation, guarantees:
Good anti-rust power even when used at minimum rates
A good natural resistance to bacterial attack while containing bactericides and fungicides in very small quantities.
A perfect emulsifiability even with hard water.
An excellent separation of lubricating oil.
Exceptional cleaning of the machine
It is free from mineral oil, chlorine, boron and secondary amines.
EMULDRAW 6M
Lubricating and cooling fluid specially formulated for drawing / blanking operations, readily miscible in water, forms a highly stable milky emulsion.
Ideal to be used during molding, medium and heavy drawing, drawing of ferrous metals, aluminum and stainless steel (small and medium thicknesses). Ideal for use on PRESSE TRANSFERS and MULTIPLE PRESSES where a strong lubricating and detergent action is required.
DILUTION: variable from 5.0% up to X.
ADVANTAGES:
- strong protective power of machined parts;
- low lubrication-cooling costs thanks to the effectiveness of the product;
- easy removal from the piece: (any solvent or a warm alkaline solution).
- non-toxicity of the product.
The product guarantees a good anti-rust power even when used at minimum percentages such as 2.5%;
It ensures by nature a good resistance to bacterial attack while containing bactericides and fungicides in very small quantities;
SI has perfect emulsifiability even with hard water or anyway that create problems in the formation of emulsions.
It is free of secondary amines.
EMULDRAW C D68
The Wladoil Emuldraw C D68 is a high quality emulsifiable that has a specific application in the operations of drawing and shearing, also of copper alloys, (brass, bronze, etc.) given its total inertia towards these alloys.
The product moreover creates a finely divided emulsion with a slightly milky appearance in very hard waters, which is also odorless, very tolerable and pleasant towards the operators.
It has a high detergent, antioxidant and lubricating power, due to the instability of the emulsion which releases a layer of oil. It also has a high antibacterial power.
Recommended percentages of use with medium hard water:
from 5 to 14% depending on the operating parameters
EMULDRAW 59
Wladoil EMULDRAW 59 is a soluble in water cooling lubricant free of mineral oil, nitrites, secondary amines, chlorine and boron.
It is formulated with special synthetic lubricants and additives that make it particularly suitable for deep-drawing and shearing operations, even with hard-to-work materials, including yellow alloys and aluminum.
In water it forms a colorless transparent solution, even in hard water. The recommended utilization rates vary according to the degree of processing difficulties, the type of materials to be processed, the type of water and the operating conditions.
Typically suggested concentrations with medium/hard water vary from 8% to such.
The main features are:
- Control of rust and decay
- Stability even in hard waters
- Inertia towards copper and its alloys
- Absence of mists and fumes during use
The product does not contain secondary amines, chlorine, boron.
SOLUBLE BK
Wladoil SOLUBLE BK is a nitrite-boron-free synthetic water-repellent cooling agent, soluble in water.
It is suitable for grinding of ferrous and non-ferrous metals, where the transparency of the product and the control of the decaying of the solution are of primary importance.
It can also be used for testing machines like pumps before storage. In water it forms a colorless transparent solution even with hard water. The recommended rates of use vary depending on the degree of processing difficulty, type of water and operating conditions. Typical suggested concentrations with medium hard water vary from 2 to 3%.
The main features are:
- Control of rust and decay
- Cleaning of the wheels
- Stability even in hard waters
- Inertia towards copper and its alloys
- Absence of mists and fumes during use
The product does not contain sulfur, chlorine, phosphorus, boron.
SOLUBLE RTR
The Wladoil SOLUBLE RTR is a synthetic nitrous and boron-free, water-soluble lubricant.
It is suitable for chip removal and grinding operations with and without centers, of ferrous and non-ferrous metals, where the transparency of the product and the control of the decaying of the solution are of primary importance.
It can also be used for testing machines like pumps before storage.
In water it forms a colorless transparent solution, even in hard water.
The recommended rates of use vary depending on the degree of processing difficulty, type of water and operating conditions.
Typically suggested concentrations with medium/hard water vary from 2 to 8%.
The main features are:
- Control of rust and decay
- Cleaning of the wheels
- Stability even in hard waters
- Inertia towards copper and its alloys
- Absence of mists and fumes during use
The product does not contain sulfur, chlorine, phosphorus, boron.