Four stroke engine
13 June 2017
Automatic transmissions
13 June 2017
Greases
Grease 200F Ep (NLGI 0/1/2/3)
Extreme pressure lithium grease. Read more...
Grease Gold 200 FN 2
Graphite grease. Read more...
Grease MR /3 NLGI 3
Lithium grease EP. Read more...
Grease Blue NLGI 2
Special long lasting grease. Read more...
Grease Active CE NLGI 2
Special water-resistant grease. Read more...
Grease Super RS NLGI 2
Special high temperature grease. Read more...
Grease Alugreen EP E
Read more...
Grease Universal T NLGI 2
Teflon grease. Read more...
]
GREASE 200F EP (NLGI 0/1/2/3)
The products in the Wladoil Grease GOLD 200 F EP SINT range are multifunctional lithium greases formulated with synthetic bases and special additives that give good thermal and mechanical stability.
The Wladoil Grease GOLD 200 F and EP SINT, due to their particular characteristics, have their most important use in the lubrication of sliding and friction bearings subjected to vibrations and high loads.
They can be used in all EP-type applications, such as lubricating gears and mechanisms subjected to heavy loads when one wants to avoid the use of fluid oil.
Their main features are:
- high resistance to mechanical stress and high loads
- excellent oxidation resistance
- excellent anti-wear, anti-corrosion and anti-rust protection
- excellent adhesive power
- good resistance to the flushing action of the water
- wide operating temperature range.
The NLGI 0 gradation also possesses excellent pumpability.
GREASE GOLD 200 FN 2
Special grease with anhydrous calcium soap containing finely dispersed graphite. It is recommended for general lubrication and stabilization of flat bearings and various parts that are very worn or with poor surface finish, as well as pressures, gaskets, support washers etc..
It is not suitable for rolling bearings. It is strongly water repellent.
GREASE MR /3 NLGI 3
Wladoil Grease MR 3 is a special grease composed of a highly refined low viscosity base and antioxidant, anti-rust and E.P. The thickener is a lithium soap. Thanks to its consistency and to the special additive package, Wladoil Grease MR 3 is particularly suitable to be used on wheel hub bearings of industrial vehicles and for general greasing of industrial vehicles if no other specific greases are required.
Its main features are:
- excellent stability to mechanical stress that prevents oil leakage
- high resistance to oxidation which guarantees a long life of the grease
- high resistance to water washout
- good anti-rust properties and load resistance (E.P.)
Recommended temperature of use: -20 / + 120 ° C
Duration: earth and agricultural machinery: 50 hours
Industrial vehicles: 50,000 km
GREASE BLUE NLGI 2
Wladoil grease BLUE is a special grease consisting of a mineral base and a semi-synthetic ester. The thickening soap is lithium based. The particular additives employed give the product excellent EP, antioxidant, anti-rust, adhesive properties. Its main features are:
- excellent adhesion that allows a more effective and lasting lubrication,
- excellent resistance to both salty and sweet water.
- excellent resistance to aging
Wladoil grease BLUE is a very persistent grease suitable for the lubrication of vehicles, industrial, construction and agricultural machines. It resists centrifugation.
Given its characteristic of great resistance to water, it is recommended for very heavy applications in very humid environments.
The great adhesiveness and the marked EP, antioxidants, and anti-rust properties, allow a considerable prolongation of lubrication intervals.
For particular environmental conditions (cold) there is also a version of the Wladoil Grease Blue with higher penetration values.
GREASE ACTIVE CE NLGI 2
Wladoil Grease Active CE is a special water-resistant grease thickened with anhydrous calcium soap packed with antioxidant, anti-rust and tackifying additives. It shows active structural stability.
Stabilità strutturale attiva.
Wladoil grease Activ CE is a very persistent grease suitable for the lubrication of vehicles, industrial, construction, and agricultural machines.
Given its characteristic of great resistance to water (even at close to boiling temperature) it is recommended for very heavy use in very humid environments. The great adhesiveness and the marked EP properties allow a considerable extension of the lubrication intervals.
TOperating temperature: -25 ° C / + 130 ° C
GREASE SUPER RS NLGI 2
Precisely designed special grease, formulated with a complex soap added with a semi-synthetic high viscosity index oil that gives the product characteristics far superior to the normal fats on the market, today.
Based on its characteristics, the Wladoil Super RS is suitable for any type of lubrication, from low to high temperatures, in many sectors ranging from automotive, agriculture and the mechanical industry.
It is particularly recommended for the lubrication of bearings of all kinds, especially if subjected to high loads and high temperatures.
It possesses an excellent adhesiveness that allows a more effective and long-lasting lubrication, and is ideally resistant to both salty and sweet water.
It also contains a special EP additive which, when possible, performs similarly to molybdenum bisulphide and graphite ones but with a light color, in accordance with current market trends.
The Wladoil Super Grease RS has an exceptional resistance to aging even in the most severe operating conditions (high temperatures - presence of pollutants), which therefore allows a considerable prolongation of the lubrication cycles.
It is available not only in normal packs but also in 600 cc cartridges with manual or pneumatic pump.
GREASE UNIVERSAL T NLGI 2
Wladoil Grease UNIVERSAL T is a "multipourpose" special grease composed of base oil subjected to very high refining, thickened with a complex lithium soap with EP additives, antioxidants, anti-rust, anti-wear agents, and a suitable quantity of P.T.F.E. with 90% <6 micron granulometry.
Wladoil Grease UNIVERSAL T is a "multipourpose" special grease composed of base oil subjected to very high refining, thickened with a complex lithium soap with EP additives, antioxidants, anti-rust, anti-wear agents, and a suitable quantity of P.T.F.E. with 90% <6 micron granulometry.
Thanks to its structural characteristics it can be considered a universal lubricating grease suitable for the lubrication of medium speed kinematisms.
It can be used for general greasing of construction machinery, in the mechanical industry, in medium-speed bearings.
Operating temperatures: -20 / +230 ° C.